Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Login


Take the time to read our Privacy Policy.

2 Pages12>
ht307munro Offline
#1 Posted : Thursday, 8 March 2012 5:37:14 PM(UTC)
ht307munro

Rank: Member

Reputation:

Groups: Registered
Joined: 9/04/2010(UTC)
Posts: 285

Has anyone purchased / fitted the rare spares HT monaro rear window filler panel (the piece between the boot and the rear windscreen). I have to replace mine and the rare spares one appears out at the ends (ie. sits up too high) and won't match up with the rear quarters. Mine has a sticker on it stating it was made in 2008 so maybe they have been redone since this time? Any advice would be appreciated. Thanks.
Alex
dirty davo Offline
#2 Posted : Thursday, 8 March 2012 6:48:42 PM(UTC)
dirty davo

Rank: Member

Reputation:

Groups: Registered
Joined: 23/07/2010(UTC)
Posts: 690

Was thanked: 1 time(s) in 1 post(s)
quote:
Originally posted by ht307munro
Has anyone purchased / fitted the rare spares HT monaro rear window filler panel (the piece between the boot and the rear windscreen). I have to replace mine and the rare spares one appears out at the ends (ie. sits up too high) and won't match up with the rear quarters. Mine has a sticker on it stating it was made in 2008 so maybe they have been redone since this time? Any advice would be appreciated. Thanks.


OMG! a rare spares panel that doesnt line up??

are you sure.

maybe your car is twisted

take it back & exchange for another one

their inner guard sections for hktg vary heaps. 1 in 10 is a reasonable fit,

regards DD

www.bellarineclassicautos.com.au
ht307munro Offline
#3 Posted : Thursday, 8 March 2012 7:33:38 PM(UTC)
ht307munro

Rank: Member

Reputation:

Groups: Registered
Joined: 9/04/2010(UTC)
Posts: 285

I know I was shocked to. Lol.
Alex
Dave Ryan Offline
#4 Posted : Friday, 9 March 2012 12:26:29 AM(UTC)
Dave Ryan

Rank: Member

Reputation:

Groups: Registered
Joined: 6/07/2010(UTC)
Posts: 73

Alex,
I am concerned to hear you think there may be a problem with the rear window filler panel you are considering fitting to your Monaro.
We have fitted these ourselves a number of times and have not had any issues.
In fact we used one on "Joan's Monaro", an HG Monaro we did a rebuild on for it's pensioner owner after it was stolen and recovered after an extensive public awareness campaign by some of the Melbourne radio stations.
The finished vehicle was featured in a number of magazines at the time.
We are searching our archives for photos of the fitted panel and will post them when we find them.
If you would care to advise where you are located maybe we can get some-one to help you through the issues, failing that please give Lance a call on 03 9305 4000 to see how we can help from this end.

Davo, with regard to your comments re the HK-T-G lower guard sections we retooled both side inners and outers mid last year and having fitted them ourselves and having provided others to various customers to test fit we are confident they fit and fit well.
If you would care to make the time to visit us I would be happy to show you the finished product as we still have the fenders and the Monaro they were fitted to at our R&D factory.

Cheers
Dave Ryan Rares Melb.



ht307munro Offline
#5 Posted : Friday, 9 March 2012 1:14:24 AM(UTC)
ht307munro

Rank: Member

Reputation:

Groups: Registered
Joined: 9/04/2010(UTC)
Posts: 285

Dave thanks for the offer. I am in Yepponn Central Queensland
Alex
dirty davo Offline
#6 Posted : Friday, 9 March 2012 7:37:35 AM(UTC)
dirty davo

Rank: Member

Reputation:

Groups: Registered
Joined: 23/07/2010(UTC)
Posts: 690

Was thanked: 1 time(s) in 1 post(s)
quote:
Originally posted by Dave Ryan
Alex,
I am concerned to hear you think there may be a problem with the rear window filler panel you are considering fitting to your Monaro.
We have fitted these ourselves a number of times and have not had any issues.
In fact we used one on "Joan's Monaro", an HG Monaro we did a rebuild on for it's pensioner owner after it was stolen and recovered after an extensive public awareness campaign by some of the Melbourne radio stations.
The finished vehicle was featured in a number of magazines at the time.
We are searching our archives for photos of the fitted panel and will post them when we find them.
If you would care to advise where you are located maybe we can get some-one to help you through the issues, failing that please give Lance a call on 03 9305 4000 to see how we can help from this end.

Davo, with regard to your comments re the HK-T-G lower guard sections we retooled both side inners and outers mid last year and having fitted them ourselves and having provided others to various customers to test fit we are confident they fit and fit well.
If you would care to make the time to visit us I would be happy to show you the finished product as we still have the fenders and the Monaro they were fitted to at our R&D factory.

Cheers
Dave Ryan Rares Melb.

yes dave ryan. i will be passn thru melbn late tmorrow arvo & would be curious to see your updated inner guard repair sections

text me your adress details & times available(0412109239) & would be curious to see above mentioned

regards DD

www.bellarineclassicautos.com.au



Dave Ryan Offline
#7 Posted : Friday, 9 March 2012 8:11:07 AM(UTC)
Dave Ryan

Rank: Member

Reputation:

Groups: Registered
Joined: 6/07/2010(UTC)
Posts: 73

Davo,
Looking forward to finally meeting you and at long last being able to show you in person what we do.
I will be at head office 20-22 Truck City Drive, Campbellfield from 9.30 ish until around 6.30.
If you have time I would be pleased to show you around the head office warehouse, the tooling warehouse, the press shop, the R&D factory and our Roxburgh Park store.
You can call me on 9305 4000 if the need arises.
Cheers
Dave
Dave Ryan Offline
#8 Posted : Friday, 9 March 2012 8:14:22 AM(UTC)
Dave Ryan

Rank: Member

Reputation:

Groups: Registered
Joined: 6/07/2010(UTC)
Posts: 73

[quote]Originally posted by ht307munro
Dave thanks for the offer. I am in Yepponn Central Queensland
Hi Alex,
We don't have any-one up there that we can refer you to however please give either Lance or I a call on 03 9305 4000 and we will see if we can resolve your concerns.
Cheers
Dave/quote]
ht307munro Offline
#9 Posted : Friday, 9 March 2012 8:37:20 AM(UTC)
ht307munro

Rank: Member

Reputation:

Groups: Registered
Joined: 9/04/2010(UTC)
Posts: 285

Dave will call tomorrow. Cheers. Alex
Alex
Dave Ryan Offline
#10 Posted : Friday, 30 March 2012 3:15:38 AM(UTC)
Dave Ryan

Rank: Member

Reputation:

Groups: Registered
Joined: 6/07/2010(UTC)
Posts: 73

Hi all,
Further to this post, as promised we have had one of our repro filler panels fitted to the HK Monaro we have here.
The panel beaters fitted it earlier today and had no problems doing so, in fact one of them commented. "It went on easily with no hocus- pocus". By that I took him to mean it went on without too much juggling around or modification.
We have recorded the process and will be posting the video on Youtube tomorrow.
I will post the link as soon as it is on.
Davo, I haven't heard from you since you last said you would drop in.
Perhaps if you can make the time it would be an ideal oportunity to inspect the GTS wheels and this panel.
Cheers
Dave
dirty davo Offline
#11 Posted : Friday, 30 March 2012 6:49:31 AM(UTC)
dirty davo

Rank: Member

Reputation:

Groups: Registered
Joined: 23/07/2010(UTC)
Posts: 690

Was thanked: 1 time(s) in 1 post(s)
[quote]Originally posted by Dave Ryan
Hi all,
Further to this post, as promised we have had one of our repro filler panels fitted to the HK Monaro we have here.
The panel beaters fitted it earlier today and had no problems doing so, in fact one of them commented. "It went on easily with no hocus- pocus". By that I took him to mean it went on without too much juggling around or modification.
We have recorded the process and will be posting the video on Youtube tomorrow.
I will post the link as soon as it is on.
Davo, I haven't heard from you since you last said you would drop in.
Perhaps if you can make the time it would be an ideal oportunity to inspect the GTS wheels and this panel.
Cheers
Dave
[/quote

will definitely take you up on that dave.

im hoping to be passing thru mon or tue arvo next week. will ring ya monday & we make a plan
Dave Ryan Offline
#12 Posted : Friday, 30 March 2012 7:55:54 AM(UTC)
Dave Ryan

Rank: Member

Reputation:

Groups: Registered
Joined: 6/07/2010(UTC)
Posts: 73

Davo,
I won't be there Monday but Tuesday is fine, or tomorrow if you can work with such short notice.
Cheers
Dave
Dave Ryan Offline
#13 Posted : Saturday, 31 March 2012 2:57:50 AM(UTC)
Dave Ryan

Rank: Member

Reputation:

Groups: Registered
Joined: 6/07/2010(UTC)
Posts: 73

As promised, here is the link to the video

http://youtu.be/PDErayT6LO0
xwute Offline
#14 Posted : Saturday, 31 March 2012 10:13:18 AM(UTC)
xwute

Rank: Member

Reputation:

Groups: Registered
Joined: 4/03/2005(UTC)
Posts: 78

Well done to all concerned. It shows the confidence you have in your development and production.
hg350gts Offline
#15 Posted : Tuesday, 3 April 2012 10:27:31 PM(UTC)
hg350gts

Rank: Member

Reputation:

Groups: Registered
Joined: 28/09/2006(UTC)
Posts: 98

Watched the vid and it was interesting to watch the repro panel get fitted as intended.. Would be great to see more RSP how-to-fit demonstrations on the net for your other products, maybe you could upload more as the project progresses?
we wreck 81837s only Offline
#16 Posted : Wednesday, 4 April 2012 5:44:08 AM(UTC)
we wreck 81837s only

Rank: Veteran

Reputation:

Groups: Registered, Veteran
Joined: 4/03/2008(UTC)
Posts: 2,151

Was thanked: 1 time(s) in 1 post(s)
if only it was that easy..
dirty davo Offline
#17 Posted : Wednesday, 4 April 2012 6:09:05 AM(UTC)
dirty davo

Rank: Member

Reputation:

Groups: Registered
Joined: 23/07/2010(UTC)
Posts: 690

Was thanked: 1 time(s) in 1 post(s)
quote:
Originally posted by hg350gts
Watched the vid and it was interesting to watch the repro panel get fitted as intended.. Would be great to see more RSP how-to-fit demonstrations on the net for your other products, maybe you could upload more as the project progresses?


video on fitting of guard inner bottoms & alignment would be interesting to see???
dirty davo Offline
#18 Posted : Wednesday, 4 April 2012 6:13:25 AM(UTC)
dirty davo

Rank: Member

Reputation:

Groups: Registered
Joined: 23/07/2010(UTC)
Posts: 690

Was thanked: 1 time(s) in 1 post(s)
quote:
Originally posted by dirty davo
[quote]Originally posted by Dave Ryan
Hi all,
Further to this post, as promised we have had one of our repro filler panels fitted to the HK Monaro we have here.
The panel beaters fitted it earlier today and had no problems doing so, in fact one of them commented. "It went on easily with no hocus- pocus". By that I took him to mean it went on without too much juggling around or modification.
We have recorded the process and will be posting the video on Youtube tomorrow.
I will post the link as soon as it is on.
Davo, I haven't heard from you since you last said you would drop in.
Perhaps if you can make the time it would be an ideal oportunity to inspect the GTS wheels and this panel.
Cheers
Dave
[/quote

will definitely take you up on that dave.

im hoping to be passing thru mon or tue arvo next week. will ring ya monday & we make a plan


i came thru melbn from interstate mon arvo dave & had time up my sleeve to drop in. maybe next time then
peter_flane Offline
#19 Posted : Wednesday, 4 April 2012 8:59:55 AM(UTC)
peter_flane

Rank: Veteran

Reputation:

Groups: Registered, Veteran
Joined: 22/05/2005(UTC)
Posts: 1,384

quote:
Originally posted by we wreck 81837s only
if only it was that easy..


Every panel is so easy to fit. I can do it real easy. Do it every day. Just takes time.
If it is old or rare - Cut it! http://www.ehlimo.com.au/
we wreck 81837s only Offline
#20 Posted : Wednesday, 4 April 2012 5:06:05 PM(UTC)
we wreck 81837s only

Rank: Veteran

Reputation:

Groups: Registered, Veteran
Joined: 4/03/2008(UTC)
Posts: 2,151

Was thanked: 1 time(s) in 1 post(s)
quote:
Originally posted by peter_flane
quote:
Originally posted by we wreck 81837s only
if only it was that easy..


Every panel is so easy to fit. I can do it real easy. Do it every day. Just takes time.


ahhh yes yes peter, wrong wording, instead of saying "so easy" i probably should have said "so quick" takes me at least 20 mins to find my sockets to remove the bolts holding the bootlid on!! you are right, its straightforward just talks time
Users browsing this topic
Guest
2 Pages12>
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Powered by YAF | YAF © 2003-2024, Yet Another Forum.NET
This page was generated in 0.254 seconds.