Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Login


Take the time to read our Privacy Policy.

HKM068 Offline
#1 Posted : Wednesday, 10 May 2017 10:02:17 PM(UTC)
HKM068

Rank: Member

Reputation:

Groups: Registered
Joined: 8/12/2012(UTC)
Posts: 47

All

Can anyone tell me where the choke cable went through the firewall on a HK? Did any V8 variant have a manual choke or were they all auto? I have a holley on a 307 that will benefit from a manual choke operation so thought at least make it look right, even if it isn't.

HKM
HK1837 Offline
#2 Posted : Thursday, 11 May 2017 6:42:46 AM(UTC)
HK1837

Rank: Veteran

Reputation:

Groups: Moderator, Registered, Veteran
Joined: 1/03/2005(UTC)
Posts: 14,569

Thanks: 1 times
Was thanked: 480 time(s) in 458 post(s)
6cyl other than 186S were manual choke, 186S and all V8 were auto choke. If no-one else gives you the answer before i'll have a look tonight and see if my 2 x V8 HK's here have the 6cyl choke hole, can't recall atm.
_______________________________________________________
If we all had the same (good) taste, who would buy all the Fords?
HKM068 Offline
#3 Posted : Friday, 12 May 2017 8:09:32 PM(UTC)
HKM068

Rank: Member

Reputation:

Groups: Registered
Joined: 8/12/2012(UTC)
Posts: 47

Thanks HK1837. Any detail gratefully appreciated.

I did find this in an older post but it is not HK and there is no mention of a choke.


(http://www.fastlane.com.au/Forum/postsm168261findunread_Ht-engine-bay-info.aspx#post170087)

Cheers

HKM
gm5735 Offline
#4 Posted : Friday, 12 May 2017 10:39:18 PM(UTC)
gm5735

Rank: Member

Reputation:

Groups: Registered
Joined: 16/04/2014(UTC)
Posts: 768
Man
Location: Victoria

Thanks: 1 times
Was thanked: 49 time(s) in 47 post(s)
I believe it uses hole number 6. This is used for one side of the ammeter connection where an ammeter is fitted.

Which now makes me what happens with a 161 or 186 fitted with a sports dash and a choke.
KBM Offline
#5 Posted : Saturday, 13 May 2017 5:42:56 PM(UTC)
KBM

Rank: Member

Reputation:

Groups: Registered
Joined: 21/04/2017(UTC)
Posts: 293
Australia
Location: Tolmie

Thanks: 2 times
Was thanked: 24 time(s) in 24 post(s)
just had a look at my v8 hk's and hole number 6 isn't there. it was only used for the amp red and tacho brown wires if you had them from factory.
if your car is original 307 it wont have the no6 hole unless fitted with either gts dash and or floor mounted tacho and it's in a bugger of a spot if your car is orig 6 because it sits dead smack centre of the dizzy.if yours is orig 307 and you don't want to put extra holes in your firewall you have the option of drilling out the underdash insulation retainer no.10 similar to the heater control cable no.11 and putting your choke cable through there but it'll be a long cable required. on my brougham which has a modified 307 with 650 dp and manual choke I put a hole where there is an indentation just below the circle, draw a line between no.5 and 6. the cable just misses the dizzy and you can use orig cable. I didn't make the hole big enough for the grommet just the cable in case I want to patch it up later.
HKM068 Offline
#6 Posted : Monday, 15 May 2017 7:46:37 PM(UTC)
HKM068

Rank: Member

Reputation:

Groups: Registered
Joined: 8/12/2012(UTC)
Posts: 47

Thanks for the replies.

The car is an original 161 so hole #6 should be there - I'll have to check. Nonetheless, the extra hole at the indentation sound ideal. Unless I can squeeze it through another hole somewhere.

HKM
Users browsing this topic
Guest
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Powered by YAF | YAF © 2003-2024, Yet Another Forum.NET
This page was generated in 0.128 seconds.