Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Login


Take the time to read our Privacy Policy.

the eh Offline
#1 Posted : Sunday, 5 February 2017 7:23:48 AM(UTC)
the eh

Rank: Member

Reputation:

Groups: Registered
Joined: 28/08/2011(UTC)
Posts: 514

Thanks: 3 times
Was thanked: 1 time(s) in 1 post(s)
Is anyone able to confirm for me the number of teeth on a GREEN Trimatic speedo drive gear? Every other colour is mentioned often however green seems to be the lost child of speedo gears. I have found only one reference anywhere. This was a forum comment saying it is 9 teeth. I don't want to pull the extension housing off this freshly painted box if I can.
HK1837 Offline
#2 Posted : Sunday, 5 February 2017 7:58:17 AM(UTC)
HK1837

Rank: Veteran

Reputation:

Groups: Moderator, Registered, Veteran
Joined: 1/03/2005(UTC)
Posts: 14,568

Thanks: 1 times
Was thanked: 480 time(s) in 458 post(s)
7 is red
8 is white
9 is blue
10 is yellow

What is the box's code? That may help track it down as it may be an obscure application like Gemini or Toyota.
_______________________________________________________
If we all had the same (good) taste, who would buy all the Fords?
the eh Offline
#3 Posted : Sunday, 5 February 2017 11:57:12 AM(UTC)
the eh

Rank: Member

Reputation:

Groups: Registered
Joined: 28/08/2011(UTC)
Posts: 514

Thanks: 3 times
Was thanked: 1 time(s) in 1 post(s)
It is just an ordinary V8 Trimatic, electric kickdown, left side shifter. I believe it was in a VB 253 Commodore.
HK1837 Offline
#4 Posted : Sunday, 5 February 2017 1:12:17 PM(UTC)
HK1837

Rank: Veteran

Reputation:

Groups: Moderator, Registered, Veteran
Joined: 1/03/2005(UTC)
Posts: 14,568

Thanks: 1 times
Was thanked: 480 time(s) in 458 post(s)
Are you sure it isn't a discoloured yellow? I don't think there would be a need for any other number of teeth on Trimatic drive gears other than 7, 8, 9 or 10? Yellow (10 teeth) is the VH, VK and VL 5.0L gear. The blue and white gears are the originals dating back to HT, and the 10 tooth yellow was added for 2.6 rear axle with the 7 tooth red added for 4cyl applications. So if there is a 6 or 11 tooth gear which is all green could be it must be for something shorter in the back end than a 3.9:1 rear axle with 13" tyres (4cyl) or longer than 2.6:1 with taller tyres.
_______________________________________________________
If we all had the same (good) taste, who would buy all the Fords?
the eh Offline
#5 Posted : Sunday, 5 February 2017 5:04:52 PM(UTC)
the eh

Rank: Member

Reputation:

Groups: Registered
Joined: 28/08/2011(UTC)
Posts: 514

Thanks: 3 times
Was thanked: 1 time(s) in 1 post(s)
Definitely green,

HK1837 Offline
#6 Posted : Sunday, 5 February 2017 5:54:35 PM(UTC)
HK1837

Rank: Veteran

Reputation:

Groups: Moderator, Registered, Veteran
Joined: 1/03/2005(UTC)
Posts: 14,568

Thanks: 1 times
Was thanked: 480 time(s) in 458 post(s)
Hmmm.
_______________________________________________________
If we all had the same (good) taste, who would buy all the Fords?
HK1837 Offline
#7 Posted : Sunday, 5 February 2017 5:57:09 PM(UTC)
HK1837

Rank: Veteran

Reputation:

Groups: Moderator, Registered, Veteran
Joined: 1/03/2005(UTC)
Posts: 14,568

Thanks: 1 times
Was thanked: 480 time(s) in 458 post(s)
Hmmm.
_______________________________________________________
If we all had the same (good) taste, who would buy all the Fords?
gm5735 Offline
#8 Posted : Sunday, 5 February 2017 7:09:02 PM(UTC)
gm5735

Rank: Member

Reputation:

Groups: Registered
Joined: 16/04/2014(UTC)
Posts: 768
Man
Location: Victoria

Thanks: 1 times
Was thanked: 49 time(s) in 47 post(s)
Just a suggestion - how about popping in a driven gear with a known number of teeth, winding the tail shaft over until you get a known number of turns of the driven gear say, 10 turns without the speedo cable, and calculating the ratio? From there you will get the number of teeth on the drive gear.
the eh Offline
#9 Posted : Sunday, 5 February 2017 7:15:28 PM(UTC)
the eh

Rank: Member

Reputation:

Groups: Registered
Joined: 28/08/2011(UTC)
Posts: 514

Thanks: 3 times
Was thanked: 1 time(s) in 1 post(s)
That would work definitely. If I can't get a definitive answer I will either remove the extension housing. The box is not in the car. Or just mark one tooth with a texta and then turn the output shaft slowly counting the teeth as we go. The only reference I have found has been on the AussieV8 forum and it is claimed to be 9 teeth..
Users browsing this topic
Guest
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Powered by YAF | YAF © 2003-2024, Yet Another Forum.NET
This page was generated in 0.065 seconds.